JET-O-MIZER™ Particle Size Reduction Systems – (1.0-45 Microns) Models & Operating Parameters

TYPICAL JET-O-MIZER SYSTEM  

TYPICAL OPERATING PARAMETERS

MillSeries # ProductionCapacity

lb/hr

ProductionCapacity

kg/hr

SCFM Air@ 70° F

& 100 psig

m 3 /hr Air @ 21° C

& 6.89 bar

Steam, lb/hr@ 700° F

& 200 psig

Steam, kg/hr@ 370° C

& 13.78 bar

00 0.1-2 0.05-1.0 4.0 6.8 N/A N/A
0101 0.5-20 0.25-9.0 10-30 17-50 60-120 30-55
0202 1-100 0.5-45 50-120 85-205 200-500 90-225
0304 50-750 25-340 100-500 170-850 400-1000 180-450
0405 100-1500 45-680 400-800 680-1360 1000-2000 450-900
0506 200-2500 90-1135 450-1200 765-2040 1500-2500 680-1130
0608 300-3500 135-1590 750-1500 1275-2545 3000-5000 1360-2270
0808 400-6000 180-2720 1000-2000 1700-3396 4000-6500 1815-2950
1112 500-10,000 225-4535 2000-4000 3395-6790 6000-9000 2720-4080
1314 800-12,000 365-5445 3000-6000 5095-10,190 8000-15,000 3630-6800

Info Request – Application

Contact information

  • Jet-O-Mizer Vertical Jet Milling SystemsMicro-Jet Horizontal Jet Milling SystemsRoto-Jet Fluid Bed Jet Milling SystemsRoto-Sizer Particle Classification SystemsThermaJet Flash Drying Systems
  • PharmaceuticalChemicalFoodCosmeticsExplosives/PropellantsR&DOther:
  • MillingDrying
  • Application (MILLING)

  • lbs/hr or kgs/hr
  • Application (DRYING)

  • lbs/hr or kgs/hr