MICRO-JET™ Particle Size Reduction Systems – (0.5-45 Microns) Models & Operating Parameters

TYPICAL MICRO-JET SYSTEM

TYPICAL OPERATING PARAMETERS

MillSeries # ProductionCapacitylb/hr ProductionCapacitykg/hr SCFM Air@ 70° F& 100 psig m3/hr Air@ 21° C& 6.89 bar Steam, lb/hr @ 550° F& 150 psig Steam, kg/hr @ 288° C& 10.34 bar
4 1-50 0.5-20 25-75 40-125 50-200 20-90
8 3-100 1.5-45 50-150 85-255 400-1000 180-450
16 50-400 25-180 250-500 425-850 750-1500 340-680
20 75-600 35-270 400-800 680-1360 1000-2000 450-900
24 100-1200 45-545 700-1200 1190-2040 1500-3000 680-1360
30 200-3000 90-1360 1100-1800 1870-3055 3000-5000 1360-2270
36 300-5000 135-2270 1700-2500 2885-4245 4000-7000 1815-3175
42 400-10,000 181-4535 2400-3500 4075-5940 6000-9000 2720-4080

Info Request – Application

Contact information

  • Jet-O-Mizer Vertical Jet Milling SystemsMicro-Jet Horizontal Jet Milling SystemsRoto-Jet Fluid Bed Jet Milling SystemsRoto-Sizer Particle Classification SystemsThermaJet Flash Drying Systems
  • PharmaceuticalChemicalFoodCosmeticsExplosives/PropellantsR&DOther:
  • MillingDrying
  • Application (MILLING)

  • lbs/hr or kgs/hr
  • Application (DRYING)

  • lbs/hr or kgs/hr